BEST ACCESS SYSTEMS 35HW Manuel de service télécharger pdf (Page 77)

Service and Maintenance for Mortise Locks

W Series Service Manual 4–23

Task H. To reinstall the core (EEL and EEU only):

1. Insert the control key into the core and rotate the key 15 degrees to

the right.

2. With the control key in the core, insert the core into the cylinder.

Note: If the core does not insert easily into the cylinder, loosen the

escutcheon screws and reposition the outside escutcheon. When

the core is inserted fully, retighten the escutcheon screws.

3. Rotate the control key 15 degrees to the left and withdraw the key.

Caution

The control key can be used to remove cores and to access doors.

Provide adequate security for the control key.

Figure 4.24 Reinstalling the core

Control key

Core

Outside of door

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 227 228

Pas de commentaire

BEST ACCESS SYSTEMS 35HW Manuel de service Page 77