BEST ACCESS SYSTEMS 35HW Manuel de service télécharger pdf (Page 171)

Installation Instructions for 34HW–35HW IDH Max Mortise Locks

BEST ACCESS SYSTEMS

Indianapolis, Indiana

Installation Instructions for 34HW–35HW IDH Max Mortise Locks

Preparing the door and door jamb

5 Drill hole for field wire harness

Caution 1: Check with your local fire marshal

before drilling a fire-rated door. Drilling through

a fire-rated door may void the fire label.

Caution 2: Be careful to drill straight through the

door, making sure the drill does not break

through the face of the door.

1 Remove the hinge nearest to the mortise cavity.

2 Using a three (3) to four (4) foot drill bit, drill a 3/8″

diameter hole through the upper back of the mortise

cavity to the center of the nearest hinge mortise.

Note: It may be easier to drill halfway from each side of

the door.

6 Prepare for wire transfer hinge and run

field wiring

1 Drill a wire access hole through the frame side of the

hinge mortise.

2 Drill holes (or pockets) for splice connectors in the

frame and door. Refer to the hinge manufacturer’s

specifications for the hole location.

3 De-burr the holes to prevent damage to the hinge

leads.

4 Run the power field wiring from the location for the

lock’s power supply to the location for the wire

transfer hinge.

5 Run the communication field wiring from the location

for the panel interface module to the location for the

wire transfer hinge.

Note: For an overview of the system, see the figure on

page 1. For specifications for power and communication

field wiring, see Components checklist, on page 2.

6 Pull the field wiring down the wall and through the

access hole in the frame.

Figure 5 Drilling the hole for the field wire harness

Hinge mortise

Upper back of

mortise cavity

Hole through

door

Inside of door

Figure 6 Preparing for the wire transfer hinge

Holes for splice

connectors

Door frame Door

Field wiring

(2 power &

2 communication)

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 227 228

Commentaires sur ces manuels

Pas de commentaire

BEST ACCESS SYSTEMS 35HW Manuel de service Page 171

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs de portes de sécurité BEST ACCESS SYSTEMS 35HW